| Customization: | Available |
|---|---|
| Application: | Cosmetics, Skin Care Products |
| Driven Type: | Electric |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Equipment Feature:
This machine is a kind of planar masks production equipment, one-time three layer mask is made up of professional for medical health fiber spun-bonded non-woven inside and outside two layer, add a layer up among filter from more than 99% of melt-blown non-woven fabric by ultrasonic welding and become, the bridge of the nose treated with environmental protection plastic coated aluminum bar, all equipped with breathable, comfortable, filtering effect B.F.E high of 99%.
Equipment capacity: 100 pieces/min.
Equipment parameters:
1. Automatic counting can effectively control production efficiency and production schedule.
2. Variable frequency control, which can adjust the running speed of the equipment according to the actual needs.
3. The equipment has a high degree of automation and low requirements for operation staff. It only needs to discharge materials and tidy up finished products.
4, modular, user-friendly design and maintenance.
Process: after the whole roll of cloth is rolled up, it is combined with a roller, the cloth is mechanically folded, the nose bridge strip is pulled and rolled up, the length is cut and imported into the edge of the bag cloth, the two sides are welded to the seal through ultrasonic welding, and then through ultrasonic side sealing, through the cutting knife cutting molding;The main body of the mask is divided into two ear bands by a tow-two distributor, and the ear bands are welded by ultrasonic.Set a number of stacking material.
Equipment environment requirements:
1. The ambient temperature is required to be between 15 ºC and 35 ºC.
2. Humidity requirement is 40 ~ 80, no condensation,
3. Power supply network requirements: AC220V,50Hz;
4. Fluctuation of power supply network: ±5. The ground line of power network meets international requirements.Where the voltage amplitude is more than 5%, automatic voltage stabilization and current stabilization devices should be installed.
5. There should be no strong electromagnetic signal interference near the installation equipment, and avoid radio transmitting station (or relay station) around the installation site.
6. Foundation amplitude: less than 50um;Vibration acceleration: less than 0.05g;Avoid a large number of stamping and other machine equipment in the vicinity;
7. The equipment space shall be smokeless and dust-free to avoid working environment with severe dust such as metal polishing and grinding;
8. Air pressure: 86 ~ 106kpa;
9. Anti-static floor should be installed in some environments, and shielding should be strengthened.
SPECIFICATIONS:
| No. | Item | Specification |
| 1 | Capacity | 120 pcs/Min. |
| 2 | Accuracy | 99% |
| 3 | Power source | 220VAC ±5% 50Hz |
| 4 | Power | 10 Kw |
| 5 | Air supply | 0.4-0.6 Mpa |
| 6 | Air consumption | About 300 L/Min. |
| 7 | Working environment | Dust-free Indoor use. |
| 8 | Dimensions | 6500x3500x1950mm (LxWxH) |
| 9 | Weight | 5000 kgs |
| 10 | Model | CYKZ-100 |
){kind=link}